Published Book on Amazon
|All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 1|
|All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 2|
출판된 한글판 도서
|최신 라즈베리파이(Raspberry Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (상)|
|최신 라즈베리파이(Raspberry Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (하)|
Original Book Contents
9.2 How to Configure the System
Too configure the system, there are two ways that uses the Shell command on the Terminal screen or use the Desktop window.
9.2.1 How to Configure Using "raspi-config" Command
To configure the system for booting the system, use the following command
■ This sets various items necessary for system operation.
■ User privilege -- Super user.
■ Rebooting after setting
Depending on the setting items, in the case that the setting is not applied until rebooting, it is confirmed whether or not rebooting will be performed immediately after the setting is completed. If rebooting is not done, the changed settings are not reflected in the system.
When you execute the command, the screen to configure Raspberry Pi system appears as follows
pi@raspberrypi ~ $ sudo raspi-config
Figure 9‑1 Execution screen of "raspi-config" command
Here you can configure the settings for various items needed for booting. Move to the corresponding item and select it by [arrow] button. If you press the [Enter] button immediately or move to [Select] by [Tab] button and press the [Enter] button, the next screen to select the details starts.