Published Book on Amazon
 |
All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 1 |
 |
All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 2 |
출판된 한글판 도서
 |
최신 라즈베리파이(Raspberry Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (상) |
 |
최신 라즈베리파이(Raspberry Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (하) |
Original Book Contents
9.8.2 Adjusting Audio Output
To adjust the audio output, use the [Advanced Options] item. Select the item and press the [Enter] button.
Figure 9‑14 adjusting Audio output in "raspi-config" command
Then the next screen to select various options starts. Select the [Audio] item and press the [Enter] button.
Then the screen to specify where you want to send the audio output appears. Select the desired one here and press the [Enter] button.
Here are options you can choose from:
■ Auto
This is a method that allows the system to determine automatically. If the audio jack is connected, output it to the audio jack, and otherwise output it to the HDMI port.
■ Force 3.5mm ('headphone') jack
This is a method to output to the headphone jack
■ Force HDMI
This is a method to output through the HDMI terminal.
Select the desired item here and press the [Enter] button. This completes the setting and returns to the previous screen.