Published Book on Amazon
|All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 1|
|All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 2|
출판된 한글판 도서
Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (상)
Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (하)
Original Book Contents
The Raspberry Pi homepage provides the official <NOOBS> utility program. Zip or Torrent type of files can be downloaded. Depending on the situation of the user, you download the appropriate format file, and extract the compressed file according to each compression format and prepare it as a normal file. The following shows the contents of the file included in the <NOOBS> utility program that has been decompressed.
Figure 4‑5 Download file of <NOOBS> utility program
188.8.131.52 Copying the <NOOBS> Utility File on SD Card
Copy the prepared utility program file to the prepared SD card to make an installation SD card. When copying files, you have to copy all files to the SD card using the normal file copy function.
184.108.40.206 Preparing Hardware System and Internet Access
Insert the SD card that stores <NOOBS> utility program into the SD card slot, and prepare the installation.
Before starting the installation process, first connect all hardware and external devices such as monitor, keyboard, and mouse to Raspberry Pi system.
Also, connect the LAN cable to Raspberry Pi and prepare the system that can access internet. Since the some operating system among the operating system that can be installed with the <NOOBS> utility does not include the corresponding all information in the downloaded <NOOBS> utility file and is required to download the operating system file through Internet during the installation process, It is necessary to access Internet to install operating system normally.