Published Book on Amazon
 |
All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 1 |
 |
All of IOT Starting with the Latest Raspberry Pi from Beginner to Advanced – Volume 2 |
출판된 한글판 도서
 |
최신 라즈베리파이(Raspberry Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (상) |
 |
최신 라즈베리파이(Raspberry Pi)로 시작하는 사물인터넷(IOT)의 모든 것 – 초보에서 고급까지 (하) |
Original Book Contents
9.10.2 Setting I2C (Inter-Integrated Circuit)
To configure I2C, use [Advanced Options]. Select the item and press the [Enter] button.
Then the next screen to select various options starts. Select the [I2C] item and press the [Enter] button.
Figure 9‑18 Setting I2C in "raspi-config" command
Then, the screen to specify whether to enable I2C appears. Select [YES] to activate I2C, [NO] to deactivate, and then press [Enter] key.
Then, the following screen will appear to let you know that I2C activation is enabled. Press [Enter] key here to complete all processing.
