Raspberry Pi_Kor_21.1.2 Libre Office 프로그램

Posted on by realomega

21.1.2 프로그램

21.1.2.1 요약

프로그램은 GNU 기반의 무료로 제공되는 오피스 프로그램으로, 아래와 같이 업무용 문서 작성에 필요한 대부분의 기능들을 제공하고 있다.

■ Calc — 스프레드시트

■ Draw — 벡터 기반 일러스트레이션 애플리케이션

■ Impress — 프레젠테이션 애플리케이션

■ Base — Database

Raspberry Pi_Kor_21.0 Chapter 21 Office 및 Utility 프로그램

Posted on by realomega

Chapter 21 Office 및 Utility 프로그램

Chapter 주요 내용

여기서는 Raspbian에서 기본적으로 사용할 수 있는 여러 가지 업무용 프로그램과 컴퓨터 사용에 필요한 여러가지 utility 프로그램에 대해서 소개할 것이다. 이러한 프로그램들 중에는이미 설치되어 있는 것도 있고, 추가로 설치해야 사용할 수 있는 것도 있다.

다음과 같은 항목에 대한 내용을 포함하고 있다.
■ OpenOffice

■ Gimp

■ Scrot

■ CUPS

■ Web Browser

Raspberry Pi_Kor_21.1.1 사용할 수 있는 Office 프로그램

Posted on by realomega

21.1 Open Office – 오피스 소프트웨어

21.1.1 사용할 수 있는 Office 프로그램

실제 업무 환경에서 문서를 작성하기 위해서는 워드프로세서나 스프레드시트, 프레젠테이션 도구와 같은 기능들이 필요하다. Raspberry Pi에서도 여러 가지 프로그램들을 이용하여 이러한 작업을 할 수 있다.

● 클라우드형 프로그램.

Raspberry Pi_Eng_21.5.1 Chromium browser

Posted on by realomega

21.5 Web Browser Alternatives

In Raspberry Pi, browser is basically provided as a basic browser. This browser has a dramatic improvement in speed compared to the previous version of , so you can work at high speeds in the Internet environment, and there is no inconvenience to use it as a whole. However, you may need to use a different browser depending on your personal preference or work environment. In this case your can install and use a desired browser additionally.

Raspberry Pi_Eng_21.4.4 Verifying Printer Installation and Printing

Posted on by realomega

21.4.4 Verifying Printer Installation and Printing

In the Desktop GUI window, if you print using menu FileàPrint in [Leafpad] or menu Setting à Print in web browser, you can see that newly installed printer is added as below. When you print with the newly installed printer, the contents are printed on the printer.

Raspberry Pi_Eng_21.4.3 Setting up Printer Server Using CUPS Program

Posted on by realomega

21.4.3 Setting up Printer Server Using Program

After the installation of the program is complete, you need to configure the printer server installed by the program so that it actually works properly, and can connect to the actual printer to be printed on.

Raspberry Pi_Eng_21.4.2 Installing CUPS Program

Posted on by realomega

21.4.2 Installing Program

Install the program as shown below. If you run the command, it checks the installation of the program and confirms whether or not to install the program. If you choose “Continue”, the installation process begins as follows.

Raspberry Pi_Eng_21.4.1 Printer Status just before Program Installation

Posted on by realomega

21.4 Program – Network Printing

Raspberry Pi requires a separate tool for printing. To do this, you can use a tool called program. (Common Unix Printing System) is a program that provides pinter server function on Unix. With this program, you can print on a printer connected to Raspberry Pi using a USB as well as a printer on the network.

Raspberry Pi_Eng_21.3.2 Screen Capture Using Scrot Program

Posted on by realomega

21.3.2 Screen Capture Using Program

21.3.2.1 Overview of Program Execution

You can use the following command to capture the screen of your system. There are several ways to capture the screen, depending on the option. Typical functions include full screen capture, selected screen capture, focused screen capture, and capture after specified time.