9.1.2 시스템 설정 대상 항목
■ 파일시스템 확장
SD card에서 아직 시스템이 사용하지 않는 공간이 있으면 사용할 수 있는 공간으로 전환해준다.
■ default user “pi’에 대한 사용자 암호 변경
시스템이 설치될 때 기본적으로 제공되는 “pi” 사용자 계정의 암호를 변경할 수 있다.
9.1.2 시스템 설정 대상 항목
■ 파일시스템 확장
SD card에서 아직 시스템이 사용하지 않는 공간이 있으면 사용할 수 있는 공간으로 전환해준다.
■ default user “pi’에 대한 사용자 암호 변경
시스템이 설치될 때 기본적으로 제공되는 “pi” 사용자 계정의 암호를 변경할 수 있다.
9.1.1 시스템 설정의 의미
시스템이 처음 작동할 때, 어떤 형태로 시작하고, 특정 내용을 어떤 모양으로 표시하고, 여러 가지 기능 중에서 어떤 기능을 사용할 수 있도록 하고, 시작과 동시에 어떤 작업을 시작할 것인지 등 시스템의 여러 가지 작동 방식에 대해서 운영자가 사전에 정할 수 있다. 이렇게 시스템이 처음 시작할 때 해당 시스템의 여러 가지 항목에 대해서 정의하는 것을 시스템 설정이라고 한다.
Chapter 9 Raspberry Pi 시스템 설정
Chapter 주요 내용
여기서는 Raspberry Pi에 Raspbian 운영체제가 설치된 것을 기준으로 시스템이 처음 작동할 때 시스템이 어떤 형태로 작동할 지를 결정하는 여러 설정 항목에 대해서 운영자가 어떻게 설정할 수 있는지를 설명한다.
다음과 같은 항목에 대한 내용을 포함하고 있다.
■ 시스템 설정 방법
■ 파일시스템 확장
■ default user “pi”의 사용자 암호 변경
■ booting 시작화면 설정
■ Internationalization Options 설정
■ 성능 항목 설정
■ camera 및 오디오 장치 설정
■ network 관련 설정
■ 주변기기 interface 장치 설정
9.9.2 Setting Hostname
To set the host name for the Raspberry Pi system, use the [Advanced Options] item as shown below. Select the item and press the [Enter] button.
9.9 Network Related Setting
This section describes the configuration of the network related environment:
■ Setting hostname
Hostname is the name given to the computer itself, which is the name that other computers will use to refer to the current computer when communicating with other computers on the network. The Raspberry Pi system is named “raspberrypi” by default at the time it is installed. If you want to change it, you can specify it as a different name when you set the booting item.
9.8.2 Adjusting Audio Output
To adjust the audio output, use the [Advanced Options] item. Select the item and press the [Enter] button.
Figure 9‑14 adjusting Audio output in “raspi-config” command
Then the next screen to select various options starts. Select the [Audio] item and press the [Enter] button.
9.8 Setting Camera and Audio Device
This section describes the environment configuration of the camera and audio device installed in the system:
■ Enabling Raspberry Pi camera
To use Raspberry Pi dedicated camera that is connected to the CSI port of Raspberry Pi, you need to activate the corresponding camera function through setting.
9.7.2 Adjusting GPU Memory
To adjust GPU memory, use [Advanced Options] item. Select the item and press the [Enter] button.
Figure 9‑12 Adjusting GPU memory in “raspi-config” command
Then the next screen to select various options starts. Use [Memory Split] here. Move to the corresponding item, select it, and press the [Enter] button.
9.7 Setting Performance Items
Here you can set the environment for items that affect system performance:
■ Setting overclock
Overclock means to increase the processing speed of the CPU by increasing the clock speed of the CPU while leaving the CPU unchanged when fast CPU processing is required for special purpose. Increasing the CPU clock speed will increase the CPU processing speed, but it can overload the CPU, causing a lot of heat in the CPU, which can damage the stability of the CPU and shorten the lifetime of the CPU. Thus, limited use is recommended.
9.6.4 Setting Keyboard
When you set up the keyboard, the necessary settings for following items are set up:
■ Keyboard model
■ Keyboard layout
■ Function key for altgr
■ Compose key
■ Control+alt+backspace